Furman M-8x AR 15 Amp Voltage Regulator + SKB 1SKB-SC192U 2U Shoulder Bag

Description

ProAudioStar
DJ GEAR
INSTRUMENT GEAR
LIVE SOUND
RECORDING
MICROPHONES
HEADPHONES
ACCESSORIES
SOFTWARE
LIGHTING
BUNDLES
Authorized Dealer - Full Warranty
Furman M-8x AR + SKB 1SKB-SC192U
15 Amp Voltage Regulator with Portable 2U Rack Shoulder Bag
- Bundle Deal -
Description
Package Includes :
1 x
Furman M-8x AR
1 x
SKB 1SKB-SC192U
Furman M-8x AR
The Furman M-8x AR Voltage Regulator is intended to protect sensitive electronic equipment from problems caused by AC line voltage irregularities such as brownouts, sags, and over-voltage conditions. Such irregularities can cause audio tonal changes, digital equipment malfunctions (such as loss of MIDI programs or other data), or in extreme cases, permanent damage.
Power Conditioning Definitions
Voltage Regulation
The AC line voltage is a number representing the nominal electrical potential that has been adopted in a region for powering electrical equipment of all kinds. In most of North America the line voltage is 120VAC. The actual voltage can fall below or rise above this nominal level due to brownouts, power cutbacks, use of substandard wiring, and other causes. These deviations can cause poor performance or a malfunction. A voltage regulator is a device which, through use of an autotransformer, corrects for deviations in line voltage by switching transformer taps such that the output voltage is at or near the nominal AC line voltage level.
Spike (also called surges or transients)
Spikes can have voltages as high as 6000 volts. Though they are usually of very short duration, the energy they contain can be considerable and enough to damage sensitive solid-state components in audio and computer equipment. Spikes can also foul switch contacts and degrade wiring insulation. They are an unavoidable component of electric power. They are caused unpredictably by electric motors switching on or off (on the premises or outside), utility company maintenance operations, nearby lightning strikes, and other factors. Spikes are absorbed by special components called MOV's inside the M-8x AR to provide safe voltage levels to protect your equipment.
RFI/EMI Interference
Noise from RFI (Radio Frequency Interference) or EMI (Electro Magnetic Interference) involves lower voltages and less energy than is found in spikes, but it is continuous or transient. It is not likely to cause physical damage, but it can certainly be annoying, producing static in audio circuits, ""snow"" on video screens, or garbled data in computers. Noise can be introduced into AC lines by nearby radio transmitters, certain kinds of lighting, electric motors, and other devices. Because RFI/EMI noise occurs at higher frequencies than the 50 or 60 Hz AC line, it can be effectively reduced through the use of low-pass filtering.
Extreme Voltage Protection
The M-8x AR includes special circuitry to sense over and under voltage conditions and either regulate or disable the output before damage can be done to connected equipment. Please refer to the specifications for the exact voltages at which shutdown occurs. When the input voltage falls outside the regulation limit, the power will cut off. Power will automatically be restored when the condition has subsided. The two red LEDs labeled ""EVS"" indicate a protective shutdown condition.
Extreme Current Protection
The M-8x AR includes a special ECS circuit to detect an extreme over-current condition and shut down the outlets before damage is done to the M-8x AR or your connected equipment. The ECS circuit has been designed to detect high speed and high level currents and will ignore low speed / low current transients, such as amplifier inrush currents. When an ECS condition has been detected, the M-8x AR will shut down outlets and illuminate the red Extreme Current LED.
SKB 1SKB-SC192U
The 1SKB-SC192U, a 2U rack size, is constructed of a wood core covered by 600 Denier Nylon. This soft case has been developed with the focus on portability and includes an adjustable shoulder strap and loop handle for easy transport. The case can be used for transporting testing or smaller rackmounted equipment.
The 14.8” depth (front rail to back flap) provides plenty of room for the most popular wireless systems. The padded front and back lid has heavy duty zippers that allow for the flaps to open fully and fold underneath. A zippered pouch on the inside front flap provides excellent storage of wireless mic antennae. An ample sized exterior zippered pouch is ideal for cables and/or body packs. Threaded steel rack rails are recessed to provide protection for equipment controls without inhibiting proper antennae placement.
Features/Specs
Furman M-8x AR
Family : Merit Series
Line Voltage : 120 (Volts)
Number of Outlets : 9
Number of Isolated Banks : 0
Outlet Descriptions : All 9 outlets regulated and conditioned -eight on the rear panel and one on the front
Rack Mountable : Yes
Rack Ears Included : Yes
Front Panel Meter(s) : Eight element, Bi-color bar graph meter to indicate input line voltage
Front Media Light(s) : No
Control : Front panel:  - On/Off switch
Voltage Regulation
Regulation capture range
97 VAC to 141 VAC
Output Voltage :
120 VAC ±5V
Compliancec : CSAus
USB Charging : N/A
Low Voltage Trigger : N/A
AC Power Cord : 10 ft. captive AC power cord with NEMA 5-15 Plug
Dimensions : 19" W x 11" D x 1.75" H
AC Protection
AC Protection TechnologyVoltage Regulation
Extreme Voltage Shutdown
Extreme Current Shutdown
Under-Voltage Shutoff75V
Over-Voltage Shutoff145 VAC
Maximum Current Rating15 (Amps)
Initial Clamping Level400 volts peak at 500 A
Filtration
Filtration TechnologyStandard Level RFI/EMI Filtration
Filtration Rating
-16dB @ 10KHz
-33dB @ 100 kHz
-48dB @ 400KHz
Signal Line Protection : No
Shipping Info
Length21.9 (Inches)
Width14.4 (Inches)
Height3.2 (Inches)
Unit of MeasureEach
UPC654061041146
Master Pack Qty2
Other
Spike Protection Modes:Line to Neutral
Energy Dissipation:225 joules
Peak Impulse Current:15,000 amps
Construction:Steel Chassis, Black Painted
SKB 1SKB-SC192U
Constructed of wood a wood core covered by 600 Denier Nylon
Adjustable shoulder strap and loop handle for easy transport
14.8” depth (front rail to back flap)
Padded front and back lids have heavy duty zippers
Exterior zippered pouch is ideal for cables and/or body packs
Interior front pouch that provides excellent storage of wireless mic antennae
Recessed threaded steel rack rails
Lid Depth : 1.25 in 3.18 cm
Base Depth : 15.00 in 38.10 cm
Interior Length : 16.25 in 41.28 cm
Interior Width : 19.00 in 48.26 cm
Interior Height : 3.50 in 8.89 cm
Space Units Total : 2 2
Depth Front Rail to Back Lid : 14.50 in 36.83 cm
Exterior Width : 20.75 in 52.71 cm
Exterior Height : 6.50 in 16.51 cm
Exterior Cu. Volume : 1.37 cu ft 0.04 cu m
Min. Temperature : 0.00° F -17.78° C
Carton Length : 22.00 in 55.88 cm
Carton Width : 18.00 in 45.72 cm
Carton Depth : 7.50 in 19.05 cm
Carton Cu. Volume : 1.72 cu ft 0.05 cu m
We are authorized dealers for all these brands. Click a logo to see our listings.
ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
We provide free shipping to the contiguous 48 United States, on most items.
Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
Please contact us for a Return Authorization before returning any items.