HALTER PLATE SMALL or LARGE SADDLE 3" x 1/2" SOLID NICKEL SILVER ENGRAVED

Description

SMALL HALTER or LARGE SADDLE PLATE 3" x 1/2"
SOLID NICKEL SILVER CUSTOM ENGRAVED
TO ORDER:
Please add your preferences in the
Notes to Seller section.
(
NOTE:
ALL
of the following information
(1-4)
is required when ordering. Any omission will result in a delay of your order.)
(
Charges for a second line and/or any other extras will be billed, via Paypal, in a separate invoice.)
1.
Specify whether you want BRADS
(FREE) (Sadddle)
, SCREWS
(.95 Extra) (Saddle),
RIVETS (Halter)
or CHICAGO SCREWS (Halter) as described below:
NOTE: Fasteners are NOT included except where specifically noted. See below for ordering fasteners of your choice.
If NO FASTENERS required, please state if you need rivet or Chicago screw holes (Halter).
1/4" Rivets
(.95 EXTRA
*
)
used for 1-ply (single layer) leather OR 2-ply (double layer) nylon
3/8" Rivets
(.95 EXTRA
*
)
used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon
1/2" Rivets
(.95 EXTRA
*
)
used for 3-ply (triple layer) leather OR 3-ply
+
(triple layer) nylon
1/4" Chicago screws
(.99 EXTRA + shipping
*
)
used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon
3/8" Chicago screws
(.99 EXTRA + shipping
*
)
used for 3-ply (triple layer) leather OR 3-ply + (triple layer) nylon
(When you are NOT ordering fasteners, we still need to know what fasteners the holes will be drilled for.)
*
Unfortunately, when rivets and Chicago screws are ordered, increased USPS rates (
as of 1/21/2018)
apply:
We have to ship as a large envelope and pass a partial shipping charge on to you.
That's why we have to charge for the rivets.
Chicago screws must be shipped as a First Class parcel,
(with tracking number) and incur a
discounted shipping charge of
.99
.
(Billed through PayPal via a separate invoice)
We are NOT making any profit from these charges
.
2.
Specify one or two lines of engraving
A second line is .00 extra
(Billed through PayPal via a separate invoice)
3.
For EACH line,
write text exactly as it is to be engraved
.
Write text
exactly
as it is to be engraved for EACH line.
We will engrave in all high case (all caps) unless otherwise requested, except for script and Olde English which will be engraved in Upper & Lower unless  all high case is specifically requested.
Do NOT
use quotes ("), unless they are to be engraved.
Maximum of 20 characters
, including spaces, on the first line.
4
.
For EACH line,
Choose a font from photo 10:
SIMPLE BLOCK
SIMPLE BLOCK ITALIC
FOUR LINE BLOCK
FOUR LINE BLOCK ITALIC
ROMAN BLOCK
ROMAN BLOCK ITALIC
CLARENDON
CLARENDON ITALIC
SIMPLE SCRIPT
SLANT SCRIPT
CENTURY BLOCK
OLDE ENGLISH
(We offer Script and Olde English in upper & lower case only, unless by special request.)
NOTES:
Maximum of
20
characters, including spaces, on the first line.
A second optional line is
extra
which will be billed, via Paypal, in a separate invoice. (We can usually accommodate a few more letters on the 2nd line.)
The first line is usually a bolder, more prominent font, while an optional second line
is usually slightly smaller. The choice of font represents such, e.g. 1st line Roman Block (RB), 2nd line Simple Block (SB).
(
Charges for a second line and/or any other extras will be billed, via Paypal, in a separate invoice.)
IMPORTANT:
Check your eBay messages frequently. If we don't receive a response from you to any questions we may have about your order before the eBay ship-by date, we reserve the right to make our best judgement as to layout, colors fonts, case, and/or size, in order to meet those shipping requirements.
*********************************************************************************************
DESCRIPTION:
This size is appropriate for a large saddle.
Engraved in brushed satin solid nickel silver, it comes with one line engraved. For a saddle plate, choose brads (no charge) OR round head Phillips screws (
.95 extra
) to use
on the back of the cantle, (usually the saddle owner's name)
. For a bridle or brow plate, choose rivets. For a small halter plate, choose r
ivets or Chicago screws, see
#2 above
for
extra charge.
(All extras will be
invoiced separately via Paypal
.)
Our nickel silver is the finest quality available for engraving, and is finished with a baked-on synthetic resin, that will not tarnish or rust.
It is extremely sturdy and creates an
elegant finish to a saddle, bridle or small halter.
We rotary diamond engrave the name into the metal six times, to create a very durable engraving, much more so than just diamond etching or laser engraving, that has a tendency to rub off. The exposed raw metal is then double acid oxidized to produce the darkened image.
Can also be used for Pets and ID tags, (to be mounted with rivets).
Please be double sure to check your order before submitting and include a phone number to reach you, if we have any questions.
Please ask all questions before purchasing!
If you are ordering more than one, please place your orders separately,
to avoid confusion.
INTERNATIONAL SHIPPING:
We are no longer shipping Chicago screws and rivets internationally, as this quadruples your shipping charge!!
We are NOT responsible for customs duty, taxes and fees, etc., or any delay that might be incurred from them.
Thank you for your order. We have been in business since 1984, previously as Endless Creations, now as Endless Etc LLC, (endlessetc.com), with many satisfied and happy customers. We have attended many prestigious horse shows across the country, over the years, so whether you're an 'old' customer, or a new client, we welcome you to experience our high standards of workmanship and service. We aim to please!
Endless Etc Engraving